Vinyl Window Designs Pleads Guilty, Pays $165,000 in Death of Worker

April 29th, 2019 by Drew Vass, Executive Editor

Nearly two years after the death of a worker at North York, Toronto-based Vinyl Window Designs Ltd., the Ministry of Labour for Ontario, Canada, issued a $165,000 ($122,619 U.S.) fine last week to the company. The fine comes after an investigation and a guilty plea forfailing as an employer to ensure that the measures and procedures prescribed by section 24 of Regulation 851 were carried out in a workplace, contrary to section 25(1)(c) of the Occupational Health and Safety Act.”

The event occurred on July 18, 2017, when a worker was killed, after entering a barrier enclosure to troubleshoot a machine. The machine had not been properly locked down and disabled, a Ministry of Labour report said. A spokesperson for the Ministry of Labor told reporters for DWM on September 28, 2017, that an investigation was launched to assess the incident—a process they said could take months to complete.

According to a report published and distributed by the Ministry of Labour, when problems arose with a machine used for welding, fabricating and corner cleaning, the worker was summoned. As the machine sat idle, the worker entered a fenced enclosure through an access gate, then asked the machine’s operator to place it into operation in order to advance a window unit through the unit’s feed, the report explained. As the worker applied oil to parts of the machine, the machine’s transfer arms cycled, crushing the worker against its frame, resulting in fatal injury. Following the incident, a media relations officer with the Toronto Police Service told DWM that the worker was taken to a hospital, where they were pronounced dead.

Among the related issues discovered by Ministry of Labour investigators were disconnected interlocks, designed to shut down the operation of the involved machine upon the opening of access gates for entry. The gate that was used at the time of the incident was “always open,” the report said, and, at the time of the accident, was “tied back with plastic.” Section 24 of Regulation 851, the Industrial Establishments Regulation, states that “where a machine or prime mover or transmission equipment has an exposed moving part that may endanger the safety of any worker, the machine or prime mover or transmission equipment shall be equipped with and guarded by a guard or other device that prevents access to the moving part.” Under the circumstances, regulations also require that a machine’s power source be disengaged and locked out, but the machine’s power was left engaged. Meanwhile, the operator, which the Ministry of Labour’s report said was a supervisor and plant manager, was aware of the open gate, but had not received specific training on lockout procedures. 

“Our number one priority is to provide a safe workplace. The tragic loss of one of our employees as a result of a workplace accident has saddened the company. Our thoughts and prayers have been with the family, friends and co-workers of the employee,” Philip Spatafora, owner and president of Vinyl Window Designs told DWM in a written statement. “For over 25 years Vinyl Window Designs has maintained an excellent health and safety record,” he added. “This accident brings to the forefront the importance of constant and diligent training, and enforcement of safety protocols. At no time can a company take this responsibility for granted.”

A conviction was made April 24, 2019. In addition to the $165,000 fine, the Ministry of Labour also imposed a 25% victim fine surcharge, a fee that’s required by the Provincial Offenses Act. Surcharges are credited to a special provincial fund to provide assistance to victims of crime.

This article is from Door and Window Market [DWM] magazine's free e-newsletter that covers the latest door and window industry news. Click HERE to sign up—there is no charge. Interested in a deeper dive? Free subscriptions to [DWM] magazine in print or digital format are available. Subscribe at no charge HERE.

Tags: ,

One comment
Leave a comment »

  1. What a terrible lapse of safety protocol. And, a needless loss of a person’s life!

Leave Comment